An upgraded version of the 26” DJ Ripper? You bet! The DJ Ripper HD uses the same legendary PK Ripper frame design as the standard DJ Ripper, but has upgrades galore. The bike comes equipped with Manitou Circus Expert air compression forks that feature a 20mm through axle and an externally adjustable compression to lockout and rebound. The upgraded SRAM Level hydraulic disc brakes feature a 2-piston caliper and expandable bladder. The all-new DJ Ripper HD is definitely the baddest dirt jumper around.
- 6061 aluminum frame with floval tubing featuring a symmetrical looptail rear end and 1-1/8"-1.5" tapered integrated head tube
- Manitou Circus Expert air compression forks with 100mm travel, 1.5" tapered alloy steerer tube, 20mm thru axle, and external adjustable compression to lockout & rebound
- 6061 aluminum handlebars with 31.8mm clamp area
- SRAM Level hydraulic disc brakes with 2-piston calipers and SRAM Direct Link Level brake levers
- SE 3-pc V-Ridge cranks with outboard bottom bracket and alloy SE chainring
- Authentic ODI Mushroom II grips with donuts
- External bottom bracket
- Padded SE Pivotal seat
- Vee Tire Co Two Six DJ tires
- SE Racing top tube pad
|Frame||6061 Aluminum Floval Tubing, Symmetrical Looptail Rear End, 1-1/8"-1.5" Tapered Integrated Head Tube, Seatstays Wrap,Disc Brake Tabs, 135mm Spaced Dropouts|
|Fork||Manitou Circus Expert, 100mm Travel, 1.5" Tapered Alloy Steerer Tube, ABS+ Externally Adjustable Compression to Lockout & Rebound, Alloy Stanchions, ACT Air, Internal Shim Stack High Speed Damping|
|Headset||FSA NO.42/ACB-A Sealed 1-1/8"-1.5" Tapered, Integrated Headset|
|Axles||Hexlock 20mm Thru Axle|
|Rims/Wheels||Alloy 32H w/35mm Double-Wall Rims, 12T Cassette,|
Front: 20mm Thru Axle 110mm Sealed Hub
Rear: Nutted 135mmm Sealed Rear Hub
Front: Vee Tire Co Two Six DJ 26 x 2.25"
Rear: 26 x 2.125"
|Crankset||SE V-Ridge 3-pc Cr-Mo, Cranks, 175mm, External Sealed Euro Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter|
|Chainrings||25T Alloy SE Racing Sprocket|
|Bottom Bracket||73mm Euro Bottom Bracket|
|Handlebars||6061 Aluminum, 29" x 2.5", 10° Backsweep, 2° Upsweep, 31.8mm Clamp Area|
|Tape/Grips||Special Edition ODI Mushroom II Dual-Ply Grips, Made in USA, w/ SE Donuts|
|Stem||Alloy Front Load, Light Weight Cutouts, 31.8mm Clamp, 40mm Reach|
|Brake Levers||SRAM Direct Link Level, Alloy|
|Brakes||SRAM Level, Hydraulic Disc, 2-Piston Caliper, 160mm Rotor, Expandle Bladder, Timing Port Closure, DOT 5.1 Fluid|
|Pedals||X-Pedo Low-profile Platform w/Removable Pins|
|Saddle||SE Pivotal Seat w/Padding|
|Seat Post||Pivotal Alloy, 27.2mm|
|Accessories & Extras||SE Racing Wing Top Tube Pad, Alloy Valve Caps|
* Subject to change without notice.